FireWire 800 1394b | Repeater

FWB2GOF01-LC

FireWire 800 (IEEE 1394b) to GOF (Glass Optical Fiber) Repeater featuring Texas Instruments TSB81BA3 and DUPLEX LC Fiber Optical Transceiver

FireWire 800 (IEEE 1394b) to GOF (Glass Optical Fiber) Repeater featuring Texas Instruments TSB81BA3 and DUPLEX LC Fiber Optical Transceiver
Introduction

FWB2GOF01-LC is a FireWire 800 to GOF repeater featuring Texas Instrument's TSB81BA3 and Fiber Optical
Transceiver.

The GOF port is Gigabit Ethernet 850nm VCSEL (Multi-Mode) Transceiver with LC-Duplex Connector.

Utilizing an IEEE1394 PHY and optical transceiver, the FWB2GOF01-LC is capable of sending IEEE1394 signals across a LC/LC optical fiber cable up to 500 meters in length!

FWB2GOF01 can also be used as a standard IEEE1394b repeater, extending your signal an additional 4.5 meters. It's easy to setup and there is no configuration necessary, like all IEEE1394 compliant hardware.

Technical Specifications

PHY
  •  Fully supports provisions of IEEE P1394b-2002
  • Fully Compliant With Provisions of IEEE Std 1394-1995 for a High-Performance Serial Bus and IEEE Std 1394a-2000
  • Three IEEE Std 1394b Fully Compliant Cable Ports at 100M Bits/s, 200MBits/s, 400M Bits/s, and 800M Bits/s
  • Cable Ports Monitor Line Conditions for Active Connection To Remote Node
  • Cable Power Presence Monitoring
Fiber Optical
  • Supports Gigabit Ethernet 850nm VCSEL (Multi-Mode) Transceiver with LC-Duplex Connector
  • Compliant with Specifications for IEEE 802.3 Gigabit Ethernet (1.25Gbd) 1000BASE-SX
  • Maximum link lengths:
    • 220 m Links in 62.5/125 gm MMF 160 MHz*km Cables
    • 275 m Links in 62.5/125 gm MMF 200 MHz*km Cables
    • 500 m Links in 50/125 gm MMF 400 MHz*km Cables
    • 550 m Links in 50/125 gm MMF 500 MHz*km Cables
  • Class 1 Laser International Safety Standard IEC 825 Compliant

Number of Ports
  • Two Bilingual IEEE Std 1394b-2002 Cable Ports (with Jackscrew Lock Holes)
  • One GOF(LC-Duplex) Port

Power Connector
  • Walkman-type 2.0 mm DC Jack
  • Power Input Range: DC 8V~30V, max. 2A
Power Consumption Less than 3 Watts.
IEEE 1394
Power Class
  • FWB2GOF01 was designed with 1394 power class 4 (PC0 ~PC2 = 100).
  • FWB2GOF01 is a bus-powered device, it could be powered from DC Jack/ FireWire (IEEE 1394) bus and will repeat the
    power to FireWire (IEEE 1394) bus.
  • Each IEEE 1394 (FireWire) port is protected by one 1.35A/33V Fuse.
Environmental
Condition
  • Operating Temperature: 10°C~40°C (50°F~104°F)
  • Relative Humidity: 10%~85% Non-condensing


Physical Dimensions
  • 93(W) x 62.17(D) x 21.46(H)mm


Applications

The FWB2GOF01 is ideal for professional audio/video transmission applications such as broadcasting, scientific research, military, industry vision control, medical monitoring systems, etc.

Installation 1

The FWB2GOF01 is ideal for professional audio/video transmission applications such as broadcasting, scientific research, military, industry vision control, medical monitoring systems, etc.

Installation 2

The FWB2GOF01 is ideal for professional audio/video transmission applications such as broadcasting, scientific research, military, industry vision control, medical monitoring systems, etc.

The FWB2GOF01 is ideal for professional audio/video transmission applications such as broadcasting, scientific research, military, industry vision control, medical monitoring systems, etc.



Certifications
  • CE Test: Pass
  • FCC Test : Pass

CE passFCC passWEEE RoHS



Kit includes
  • FWB2GOF01 optical repeater.
  • IOI-DC1510 AC to DC power adapter. (optional)
    • Input: Full Range 100 ~ 240 V, 0.5A 50 ~ 60Hz
    • Output: DC +15V, Normal Load:0.5A, Maximum Load:1.0A
    • Power Max. 15 Watt
    • Safety: UL/CSA/TUV/T-MARK
    • DC connector: Walkman-type 2.0mm plug-in x 1
    • Dimension (mm): 80 X 55 X 30.5

Note: Optical cable and Firewire cables are not included.



Document Download
FWB2GOF01-LC